Triple Glazed Windows Single Brick

Home Products Glass Benefits Testimonials FAQ Order Installation Technical Delivery Employment Contact
 
       
 
Single Brick  
   

The most important part of the installation procedure comes before you even have your windows.

 
       
 

It is critical that you measure your old window opening properly and accurately. Pvc windows are custom-built and can't be returned if the size ordered was inaccurate. This is why for all replacement windows and doors and some new constructions, our trained technicians will take their own measurements before manufacture. Most windows and doors are manufactured to +/-2 mm accuracy so ideally you should get the closest fit possible.

We recommend the installation and glazing of Window Factory Double Glazed Windows and Doors be carried out by qualified technicians (such as window installer and glazier) or builders. However, we have had many enquiries from DIY enthusiasts for supply only. We are happy to provide Double Glazed Windows and Doors on a supply only basis, but feel that for some of our clients, the installation work performed by themselves or independent trades people has compromised the quality of our windows and doors somewhat. For instance, in the event of a large gap between the wall and window, which is not covered or filled, there will be a decrease to the noise insulation and energy efficiency of the window or door.

Please note that we will not be responsible for incorrect installation if we did not install your windows and doors, and we suggest that you contact the responsible party who performed the installation work. We have been very successful at fixing poor installation of Double Glazed Windows and Doors - even those supplied by our competitors, but a fee is payable for this service, which depends on the complexity of the job and the quantity of items involved. We also offer a consultation service for builders if they are unfamiliar with Pvc windows.

The errors of judgement of some clients have led us to the creation of avoid-a-DIY-disaster installation tips. Please note that this information intended to be used as suggestions on what to look out for, based on our experience in correcting many problem installations, rather than a step-by-step guide to installing the Double Glazed Windows or Doors. Every installation may have unforeseen difficulties ranging from the weather to architectural challenges which may require an experts knowledge and experience to resolve, and although we took care in providing accurate information, please don't take complete reliance on it.

Tools on hand:

  • Gloves with good grip (heavy duty) and Goggles
  • Tape Measure
  • Plastic Packers - various sizes
  • Pencil
  • Light Hammer
  • Masonry Chisel
  • Screwdriver
  • Spirit Level
  • Hand Drill (electric or cordless)
  • Hammer Drill
  • Drill bits
    • 3mm Pilot drill
    • 8mm HSS drill
    • 8mm Masonry Drill
    • 5mm Clearance
  • Fixing bolts
  • Screws
  • Skeleton gun (mastic application)
  • Spatula
  • Tyre Lever - nail bar
  • Expanding foam
  • Bin
  • Silicon

Before starting it may be prudent to first check the size, style and position against order. The Double Glazed Window may be perfectly installed, but if it is upside-down or meant for another room - the plan is compromised!

As uPVC Windows are not designed to be loadbearing, a lintel may be required above the window. If you are unsure, please consult a qualified fitter/surveyor. The new window should be approximately 10 mm smaller in height and width than the brick opening. Clear around the site of window, removing curtains/blinds/ornaments etc

To remove existing window:

Prepare the immediate site by covering with durable dustsheets inside and out.

     
 
  Pic 1.

Using screwdriver/nail bar remove all opening sashes.

To remove glass in remaining window fixed lights, carefully crack glass with the aid of a screwdriver/punch and light hammer. Always start at the top corner from inside the window, remove cracked shards and deposit into plastic bin.

     
 
  Pic 1.

With the aid of a Stanley knife on inside of window, break plaster seal around periphery of window frame.

Using crosscut saw, cut through the remaining vertical (mullion) and horizontal (transom) frame members and remove.

      

Paying attention to minimise damage to plaster, brickwork and damp proof membrane cut through the outer frame jambs head and cill of the window frame.

With careful application of the nail bar, it should now be possible to lever the framework away from the plaster line with minimum disturbance.

Remove any projecting cement accumulations with your masonry chisel and clean away any debris around the opening.

Fitting the New Window:

Cill (where required): Position the cill profile onto the brickwork, such that the up stand is snug against the plaster line of the jambs (it may be necessary to trim the 'horns' to fit around the brickwork.

Using the plastic packers, level the cill with approximately 5mm clearance between it and the brickwork.

Secure the cill to the brickwork using the 8 x 100 mm fixing bolts positioned approximately 150 mm from each end and at 600 mm centres thereafter. Check for level and do not over tighten the fixing bolts.

Run a bead of silicone along the back edge of the cill up stand.

Using silicone or superglue, secure the end caps into position. They may need trimming to size if the cill horns have been cut around the brickwork.

Remove all glazing beads from the window frame, marking them accordingly to ensure they can be replaced into the original position.

Offer the new window into position, with the base snug against the cill up stand, ensuring a tight seal into the bead of silicone. Clean off any excess silicone, which might occur. With spirit level, ensure the new window is positioned vertically and where appropriate hard up against the plaster line.

Wedge the window into position using the plastic packers provided.

Do not bend the framework by over packing.

Open the vents of the window to enable access to the outer frame jambs. Using #8 x 40 posidrive screws, secure the bottom of the window to the cill, 150 mm from each internal corner and 600 mm centres thereafter.

Secure the window jambs into the brickwork surround using 8 x 100 mm fixing bolts, again 150 mm from each corner and at +/- 600 mm centres thereafter.

In all cases ensure that the screw heads are not standing proud as this may interfere with the glass positioning.

Note: it is not advisable to attempt bolt fixing in the head of the window, as this may permanently damage the structural lintel of your window, the best solution for fixing the head is to use expanding foam.

Close and lock all opening sashes, check for square ness within the outer frame.

Glazing notes:

Prior to moving the glass sealed units into the approximate aperture, it is necessary to position 25 x 100 x 15 glazing bridges into the frame recess. A dab of silicone will secure the packer in place in preparation for the next step.

Position a 28 x 100 x 5 glazing packer onto the bottom glazing bridges. In the case of side hung sashes also glue or silicone secure an additional 28 x 100 x 5 glazing packer onto the glazing bridge opposite the hinge side.

Locate the appropriate glass sealed unit into the aperture, resting squarely on the glazing packers, ensuring the glass is central within the opening. Push the glass back into the rebate as far as it will go without using undue pressure.

Using hand pressure only, position additional 2 mm glass packers to square up where necessary.

Gently unlock and open the sashes to check that no binding occurs within the locking system and no movement occurs between the glass and frame, minor glass packer adjustments may be necessary to achieve perfect squareness.

Clip back the pre marked glazing beads into the original position in the following order first - top, second - bottom, then sides.

Carefully gun a bead of silicone between the outside masonry and window frame periphery, wiping off any excess.

Similarly, gun a thin bead of acrylic between the inside plaster and window from the periphery.

Remove all protective tape from the faces of the window frame, clean where necessary with warm soapy water.

When the window is installed, check its operation (unless fixed panel). You should not have to use force to open and close the window, and it should be airtight when closed. The sash should fit into the frame and there should be no gaps between frame and sash and frame and wall when closed. If the window or door looks crooked it has not been correctly installed. To check for operation, open the sash a few times and check if the operation is smooth and comfortable.

For expert advice and professional service call Double Glazed Windows and Doors on 0412 717 066!

 
 
 
 
 
 
 
 
 
     
 

New Construction

 

Installation of Double Glazed Windows in new homes or buildings is usually performed by the builder and his team, however, we are prepared to quote and provide an installation service if required. Installation fee is calculated on a per item basis and depends on the size and quantity of the items. The installation quote ordinarily includes glazing, but we can also provide a quote for installation excluding glazing, or a glazing only installation - we are flexible and understand that client circumstances vary.   For more information double glazed new construction

 
     
 

Replacement

 

Installation of replacement double glazed windows and doors or for new constructions includes removal but not disposal of existing windows, and includes glazing, which involves fitting glass into the frame.
If you hired a builder to manage the installation, but they are unfamiliar with upvc, we provide consulting services to ensure the windows installation is trouble free.   Great suggestions and more on double glazed replacement can be found here

 
     
 

Secondary

 

Installation of Secondary Double Glazed Windows and Doors involves installing the new Double Glazed Window behind the original window frame, which is retained, so the secondary window becomes adjacent to the existing window.
Installations of Secondary Double Glazed Windows usually take less time than replacement double glazed windows (depending on window size, shape and glazing) and without the inconvenience that can occur during window replacement such as delays on site because of architrave removal/replacement, other site works such as painting etc.   For more information double glazed secondary

 
     
 

Double Brick

 

Awning windows have both federation and contemporary architecture applications. Our windows are more than just apertures for light and ventilation - they can be a major spectacle offering a connection to heaven and earth. With the right advice about placement and size, our windows can improve comfort, utilize daylight and natural ventilation for improvement in overall health and well being.   A complete guide for double glazed double brick can be found here

 
     
 

Clading

 

Awning windows have both federation and contemporary architecture applications. Our windows are more than just apertures for light and ventilation - they can be a major spectacle offering a connection to heaven and earth. With the right advice about placement and size, our windows can improve comfort, utilize daylight and natural ventilation for improvement in overall health and well being.   Greater detail on double glazed clading can be found here

 
     
 

Sealing

 

Many people have the impression that all silicone gels on the market are the same, but we have found that their properties and, therefore, suitability varies dramatically. Generally, the descriptions of silicone offer little information as to the correct grade and type for a given application, and because of performance variability, there is no one type of silicone sealant that should be used for everything. Using the incorrect silicone or improper use may cause joint failure, contamination of surfaces because of poor application, excessive movement in the sealed joint.   Read more on double glazed sealing

 
     
 

Measuring Your Window

 

The most important part of the installation procedure for double glazed windows and doors, comes before you even order your windows. It is critical that you measure your old window opening properly and accurately. Pvc double glazed windows and doors are custom-built and can't be returned if the size ordered was inaccurate. This is why for all replacement windows and doors and some new constructions, our trained technicians will take their own measurements before manufacture. All of our double glazed windows and doors are manufactured to a high accuracy, so ideally you should get the closest fit possible.   Get all the facts on double glazed measuring your window

 
     
 

Double Glazed Windows and Doors

 
       
  0412 717 066  
  info@windowfactory.com.au  
 
 
     
 

Bay Window

 

Nothing can maximise cross ventilation without crating a draft like Bay Windows. They are more than just a period feature - when strategically placed they can replace air conditioning and provide a lovely feature for your home. They also make the room feel more spacious and appear larger, so they have been known to increase the value of a property. Typically, the bay windows are very large, even covering almost the entire distance from floor to ceiling. The effect of prolific natural light and stunning outdoor views from any angle in the room can be filtered or softened with window treatments.   Additional information on double glazed bay window can be found at this location

 
     
 

Composite Door

 

The Composite Door is gaining in popularity with great speed for clients wanting noise insulation, strength, durability and security. All our Composite Doors contain a solid interior, which is made with reinforced materials, allowing our clients to gain increased security over even a solid wooden door, and will no doubt keep the insurance provider pleased. Composite doors are extremely strong, so they don't buckle, dent or warp, because they are designed to look better and provide more security for a longer period, than wooden or glass alternatives, yet they are very price competitive. The surface contains a glass reinforced polymer material and will not fade or lose colour. Additional feature includes advanced properties that shield from the weather, to ensure you have value for money in a door that lasts for decades, not just a few years.   Supplementary advice on double glazed composite door

 
     
 

French Door

 

Make a grand entrance to your outdoor living area and impress your family and friends with our traditional and carefully crafted Double Glazed French Doors that add charm and elegance to any home! Double Glazed French Doors open and close like conventional doors, and with an outswing design can save interior space, where it is limited. Combine with a wheelchair accessible threshold, a sidelight/ fixed panel or colonial bars that add the classic look of divided light, and Double Glazed French Doors will become a stunning feature of your home!   Additional information on double glazed french door can be found at this location

 
     
 

Stacker Window

 

Self sufficient and allowing for maximum natural ventilation, Double Glazed Stacker Windows slide and fold effortlessly demonstrating the refined taste of an intelligent consumer. Double Glazed Stacker Windows can create a vast amount of space along with an inviting contemporary character, and re-create a glass wall effect because they are not constrained to the same limitations of casement, awning and tilt & turn windows where the openings are restricted. The Double Glazed Stacker Window has two or more (upto six) panels, with one panel sliding past another, and all of the panels resting or being 'stacked' on one or two sides. They are a great alternative to Bifold Double Glazed Windows, when the client prefers the sliding style over the Bifold, or when space is at a premium, since with Stacker or Sliding Double Glazed Windows you need not worry about furniture placement or possible exterior obstacles. These windows feature ease of operation and maintenance, and a universally appealing design that will complement any modern home.   For supplementary material on double glazed stacker window click here

 
     
 

Stacker Door

 

The Double Glazed Stacker Door has two or more (upto 6) panels, with one panel sliding past another, and all of the panels resting or being 'stacked' on one or two sides. They are a great alternative to Bifold Double Glazed Doors, when the client prefers the sliding style over the Bifold, or when space is at a premium, since with Stacker or Sliding Double Glazed Doors you need not worry about furniture placement or possible exterior obstacles. These doors feature ease of operation and maintenance, a universally appealing design that will complement any modern home.   Read more on double glazed stacker door

 
     
 

Awning Window

 

Double Glazed Awning Windows allow the window sash to swing outward rather than inward or up and down, so they can be located in may places around the home and easily arranged next to other window types. The awning window is the ideal window type for homes in the temperate climate zone, or homes that are positioned to take advantage of natural ventilation or breeze. Double Glazed Awning windows are made with compression and weather seal and provide higher air-tightness, energy-efficiency and acoustic insulation than other window types such as sliding and double-hung windows. Double Glazed Awning windows have a variety of applications due to their versatility and durability, and are particularly attractive option for contemporary homes because our Awning windows are manufactured locally to an indisputably imposing standard, impressing even the most discerning clientele.   Continued on the double glazed awning window page

 
     
 

Casement Window

 

Casement windows are an excellent choice for consumers concerned with acoustic, thermal and safety performance. The difference is obvious at a glance - the frame and sash look sturdy and substantial when compared to ordinary aluminium and wooden windows. You can have a beautifull home, but if you install inexpensive windows, the strucure of the home can feel cheaply built.   A complete guide for double glazed casement window can be found here

 
     
 

Tilt & Slide Door

 

Our Double Glazed Doors are more than just apertures for light and ventilation - they can be a major spectacle offering a connection to heaven and earth. With the right advice about placement and size, our Double Glazed Tilt and Slide Doors can improve comfort, utilize daylight and natural ventilation for improvement in overall health and well being. Window Factory Tilt and Slide Doors are the most innovative and attractive deck/ garden or balcony doors available. Not only do they boast the tilt option of other popular styles, but the Tilt and Slide Doors were also designed to maintain our reputation for high performance.   Examine all the facts on double glazed tilt & slide door page

 
     
 

Casement Door

 

The Casement Double Glazed Door is essentially a single panel double glazed hinged door that has one panel swinging in or out. This style is our best performing Double Glazed Door against wind, rain, fire, and even snow, the casement style is energy efficient and practical, which will have an instant impact on your home. This product is suitable for both internal and external uses and is also available for specialised commercial and architectural applications.   To obtain additional information on double glazed casement door

 
     
 

Fixed Window

 

Continuity, refinement and reflection of light will bring out the many benefits by the use of our Double Glazed Fixed Panels. They are cost efficient and offer the ultimum level of high performance in acoustic and noise insulation, since they are non-openable. Our approach deals with important aspects of architecture - the cultural and the natural environment. Combine together with other window and door types to allow the play of light and shadow in your home, or for breathtaking surrounding view, and improve the energy efficiency, sound insulation and comfort qualities in your home. Fixed panels have universal appeal and can be used in any style of home! They are environmentally friendly since they are recyclable and contribute to reduction in carbon emissions.   Get all the facts on double glazed fixed window

 
     
 

Stylish Modern Design

 

Our team has a diverse background in both commercial and residential design and we offer a unique combination of value, personal attention, and tailored services to all our clients. Our experience in successfully aligning clients requirements with their values to bring out a successful design solution for challenging work ranging from religious facilities, medical and dental offices, retail, sound studios and of course luxury homes. We foster a creative cooperation with your architect, builder and interior designer and work on joint solutions for a consistent approach that matches the clients requirements and considers specifiers recommendations. Thin and economical aluminium frames that are inevitably drafty and offer poor insulation can make even a good quality home seem cheaply built. We believe that our clients are intelligent people with discerning taste who can resist temptation of cheap imitations.   Get all the facts on double glazed stylish modern design

 
     
 

Corrosion Resistance

 

Window Factory Double Glazed Windows and Doors exceed expectations in many hostile environments that are not suitable for other types of materials. Due to the unique properties of upvc, the frame maintains high tensile strength and modulus over a moderate temperature range, low thermal conductivity, and excellent chemical and corrosion resistance to a variety of aggressive substances. In general upvc has good acid and alkali resistance as well as excellent vapour barrier properties and excellent UV resistance. Upvc frames provide many construction advantages due to the material's inherent corrosion resistance, lightweight, ease of fabrication, and other labor-saving characteristics. In addition, upvc frames are high precision and can be manufactured to a tolerable value of +/-3mm, which is ideal for demanding architectural applications.   Great suggestions and more on double glazed corrosion resistance can be found here

 
     
 

Laminated Glass

 

Is a sandwich made of one thin layer of plastic Poly Vinyl Butyral between two or more sheets of glass. The PVB sticks with the glass, forms chemical as well as mechanical bonds. When laminated with annealed glass, the layer maintains the geometric integrity of the pane in case of breakage.
Also, it gives acoustic insulation as well as providing protection against damage caused due to UV radiation because it cuts almost 99% of UV radiation present in the sunlight.   Continued on the double glazed laminated glass page

 
     
 

Chemical Compatibility

 

Chemical stability is very common among substances containing halogens such as chlorine and fluorine. This applies to PVC resins, which also possess fire retarding properties, durability, and oil/chemical resistance. Plastic double glazed windows and doors have a versatility that helps people meet the various needs of modern architecture. In addition to new projects, vinyl double glazed windows and doors are also widely used in refurbishment where it often replaces traditional materials such as metals and wood. Examine all the facts on double glazed chemical compatibility page.   Greater detail on double glazed chemical compatibility can be found here

 
     
 

Tinted Glass

 

Ordinary tinted glass is popular because it reduces heat gain and carbon emmissions, although it also marginally reduces visible light transmission. High Performance or Low-e tinted glass or spectrally selective tinted glass reduces solar heat gain to below that of ordinary bronze/ gray tint but has a visible transmittance closer to clear glass. The tint has little effect on the U-factor but reduces solar gain considerably, which can reduce the need for air conditioning in the summer. Tinted glass is useful in controlling glare - especially for those windows facing east or north east. Return the sunlight not glare into your home.   Examine all the facts on double glazed tinted glass page

 
     
 

PrestigeW T58

 

Rehau quality stands for ambition and power, and these ideas are represented well in the Prestige casement upvc window and door system. The thickness of glazing ranges from 5mm to 33 mm. This double glazed window and door system comes with an overlap that measures 8 to 10 mm located between frame and sash, and this overlap not only helps to eliminate water infiltration and dust penetration, but also aids in saving energy consumption. Design optimisation of reinforcement chambers makes the double glazed window and door made of this profile highly resistant to high wind pressure.   Get all the facts on double glazed prestigew t58

 
     
 

Added Security

 

Our Double Glazed Windows and Doors are difficult to break and when they break, they create a lot of noise. Our window units also come equipped with security systems such as multi-point locks, double-locking handles and hinge-side security devices. Windows made out of upvc, can only be forced open from outside with a great deal of ingenuity, time and physical strength. This is because plastic provides a tighter seal around the glass and it does not shrink like wooden frames sometimes do.   Great suggestions and more on double glazed added security can be found here

 
     
 

Sizes and Dimentions

 

The total cost of delivery is directly related to the sizes and number of double glazing items in your order. If any of your double glazed windows or doors exceed a certain level in either height or width, we must use a bigger truck, which will raise the cost of delivery, even if you have only a single double glzing item. The first delivery level is 4m wide; the second delivery level is 6m wide. Of course, we always stack the items in a most efficient way to save space.   Additional information on double glazed sizes and dimentions can be found at this location

 
     
 

IGUnit Glass

 

or Double Glazing is described as two or more lites of glass spaced apart and hermetically sealed to form a single glazed unit with an air gap between each lite. As the name suggests, the most important function of and IGU is to improve the thermal performance of glass when used in architectural applications. It is common to find two panel of glass and they are therefore also referred to as double glazing units. Triple glazing units are rare but serve their owners well in very cold climates. Insulated glazing may be framed in a sash or frame. IGU made of glass is called insulated glass.   Read more on double glazed igunit glass

 
     
 

Delivery Schedule

 

Double Glazed Windows and Doors strive to deliver your order of double glazed pvc products in the shortest possible time to maintain high standards of service and efficiency. Normally delivery occurs 2-6 weeks after order, at an agreed date, however delivery times are dependent on size & complexity of your order as well as your location. Customers are also welcome to make their own arrangements to pick up the double-glazed windows and doors from our pvc window and door manufacturing facility.   Additional information on double glazed delivery schedule can be found at this location

 
     
 

PrestigeD T84

 

Rehau quality stands for ambition and power, and these ideas are represented well in the Prestige casement upvc window and door system. The thickness of glazing ranges from 5mm to 33 mm. This double glazed window and door system comes with an overlap that measures 8 to 10 mm located between frame and sash, and this overlap not only helps to eliminate water infiltration and dust penetration, but also aids in saving energy consumption. Design optimisation of reinforcement chambers makes the double glazed window and door made of this profile highly resistant to high wind pressure.   To obtain additional information on double glazed prestiged t84

 
     
 

Factory

 

Double Glazed Windows and Doors' focus is to keep the costs down - and this is transferred to the client in form of lower prices. Our staff are constantly maintaining and improving our processes for maximum automation and efficiency to maintain leadership and set high standards in the double glazing industry. In order to compete on price, Double Glazed Windows and Doors have created a lean business, and due to almost complete automation using high tech machinery, a considerably better class and value double-glazed product. Continued on the double glazed factory page.   For supplementary material on double glazed factory click here

 
     
 

Handling and Storage

 

After the double glazed windows are delivered to your home or the construction site, ideally they should be installed as soon as possible, to minimise the risk of accidental damage. However, we understand that this may not be practical if there are other renovation or construction work being completed - in this case, it is best to store the double glazed window/ door frames and glass separately and in an area with limited access, so that the upvc window frames and insulated glass units experience the least movement possible.   Great suggestions and more on double glazed handling and storage can be found here

 
       
 

Double Glazed Windows and Doors

 
  0412 717 066  
  info@windowfactory.com.au